How to find the IP address of the wireless printer

This guide will explain how to find the IP address of your wireless printer, essential information for correctly configuring it within your home network. The IP address is a numeric code that identifies the printer on the network, allowing you to manage and use it optimally.

This operation is useful for those who have just purchased a wireless printer and need to configure it, or for those who need to access the printer's advanced settings. The guide is aimed at technical users who need a clear and immediate procedure to obtain this information.

By following the steps described, you will be able to find the IP address of your printer using different methods, depending on the model and personal preferences. The operation is simple and only takes a few minutes.

Prerequisites

To follow this guide and find the IP address of your wireless printer, make sure you have the following requirements:

• Wireless printer: Turned on, properly started, and connected to the router via cable or Wi-Fi.
• Router: Must be turned on and working.
• Additional device (optional): A computer, smartphone, or tablet connected to the same network as the printer.

PROCEDURE: How to find the printer's IP address

Preliminary information

How to find the IP address from the printer panel

HP printer

• Activate the printer screen by touching it or pressing any button.
• Tap the antenna icon with the bars in the bottom menu bar.
• Select Config. and then Network Installation.
• Tap View wireless details to display the IP address.

Brother printer

• Press the Settings/Impostazioni option on the printer panel.
• Use the directional arrows to select Print report.
• Press OK and select Network Config.
• Press OK again and start printing by pressing the Start button.
• If the screen is touch, tap the Settings icon, select All settings > Print report > Network Configuration and tap Yes.

Epson printer

• Press the settings button (screwdriver and wrench) on the screen.
• Open the Wi-Fi Settings > Wi-Fi Connection Test sections.
• Press Yes to start printing the network report.
• If the printer has no display, press the i (Information) button for 10 seconds or press the Wi-Fi and Print network information buttons simultaneously.
• Look for the TCP/IP IPv4 section and check next to the IP Address label.

Canon printer

• Press the Settings icon (gear) or the Menu button.
• Go to the Network Settings section.
• Select LAN settings, Wireless LAN, TCP/IP Settings, or Network Settings.
• Select View settings or Print network details or Network Configuration Page.
• For imageRUNNER printers, press Settings/Registration, go to Preferences, then Network Settings, and select TCP/IP Settings.
• For the PIXMA, TS, or MX series, press and hold the Wi-Fi or Information button until printing.
• Look for the IPv4 Address or IP Address entry on the printed sheet.

VERIFICATION AND TROUBLESHOOTING: How to test if it works and what to do if it fails

At the end of this guide, you will be able to verify the correct operation of your wireless printer and solve any configuration problems.

Functionality check

• Print test: After configuring the printer, perform a print test to verify that everything works correctly. Use your computer's operating system or the manufacturer's official app to print a test page.
• Connection check: Make sure the printer is correctly connected to the Wi-Fi network. Check that the Wi-Fi signal is stable and that there are no interferences.
• IP address verification: Use one of the methods described in the guide to verify that the printer's IP address is correct and matches that of your home network.

Problem resolution

• Printer not detected: If the printer is not detected by the computer or mobile device, make sure it is turned on and correctly connected to the network. Also, check that the printer driver is correctly installed.
• Wi-Fi connection problems: If the printer cannot connect to the Wi-Fi network, check the network's security settings and make sure the password is correct. You may need to restart the router or the printer.
• Printing error: If the printer does not print correctly, make sure there is paper in the tray and that the toner or inks are not exhausted. Also, check for any configuration errors in the printing software.
• IP address not found: If you cannot find the printer's IP address, try using a different method among those described in the guide. Make sure the printer is correctly connected to the network and that the router is turned on.

If the problems persist, consult the user manual of your printer or contact the manufacturer's technical support for further assistance.

Educational summary and practical invitation

You have learned how to find the IP address of your wireless printer through different methods, suitable for various models and situations. Here is a summary of the main techniques:

• Printer panel: Use the screen or physical buttons to access network settings and display the IP address.
• PC: Use the operating system to find the IP address of the printer connected to the network.
• Cell phone: Install dedicated apps or use router functions to retrieve the information.
• Router: Access the router interface to identify the IP address assigned to the printer.

Now that you know these methods, put them into practice to configure your wireless printer without problems. Follow the specific steps for your printer model and make sure all devices are connected to the same network.

If you need further details, consult the official brand manuals or the online resources indicated in the guide.